Solar PV Step-Up Prefabricated Substation
Specify a solar PV step-up prefabricated substation by inverter output, grid voltage, transformer duty and the required enclosure and protection scope.
ILLUSTRATIVE PRODUCT IMAGEOverview: A solar PV step-up substation is designed around the inverter output and the point of grid connection. The transformer, medium-voltage equipment and enclosure must be coordinated as one project package rather than selected from a generic photograph.
Where this configuration is considered
This configuration is relevant to ground-mounted solar plants and distributed generation projects that need an outdoor step-up point. Local grid codes, inverter characteristics and operating cycles shape the technical review.
Information to define before quotation
Provide inverter AC voltage and power, target grid voltage, number of feeders, harmonics information, ambient and altitude, protection philosophy, metering, remote monitoring and enclosure expectations. Clarify the interface with the inverter skid and the grid operator.
International standards to review
Reference standards may include IEC 62271-202:2022, IEC 60076-1:2011. The applicable editions, clauses, conformity evidence and test scope must be agreed for the final design and destination market. This page does not claim certification or guaranteed compliance for an unspecified product.
A useful question for the technical brief
What are the inverter output characteristics and the grid operator's connection requirements?
Explore the Box-Type Transformers family, compare all transformer products, or send an RFQ with your project drawings and ratings.
Related configurations.
11 kV Compact Prefabricated Substation
Specify an 11 kV compact prefabricated substation by transformer rating, switchgear, enclosure and site interfaces.
View product →Compact Prefabricated Substation
Explore a compact prefabricated substation package for outdoor distribution, with transformer, switchgear and enclosure scope defined by your project.
View product →22 kV Compact Prefabricated Substation
Explore a 22 kV prefabricated substation package with project-defined feeder, transformer and protection scope.
View product →33 kV Prefabricated Substation
Plan a 33 kV prefabricated substation for outdoor distribution or generation connection with agreed equipment scope.
View product →
15 kV Class Pad-Mounted Distribution Transformer
Discuss a 15 kV class pad-mounted distribution transformer for underground primary cable networks and project-specific IEEE requirements.
View product →Bring the essential details together.
Electrical ratings
Capacity, voltage ratio, frequency, impedance and the expected load profile.
Site conditions
Indoor or outdoor use, temperature, altitude, space, enclosure and cooling needs.
Project documents
Applicable standards, drawings, required tests, destination and delivery timing.
Tell us what your system needs.
Send a rating, single-line diagram or specification for review.